DTPDTP Serie 

DTP connectors offer the DTM design enhancements and the ability to incorporate power contacts in an inexpensive connector package. Deutsch is currently offering the two and four pin configurations.

 

FEATURES & BENEFITS

  • Integral connector latch
  • Rugged thermoplastic housing
  • -55°C to +125°C operating temperature
  • Available in 2 and 4 contact arrangements
  • Silicone seals
  • Crimp contacts with option of gold or nickel finish, solid or stamped construction
  • Current rating 25 amps all contacts @ 125°C continuous
  • Fail safe secondary locks
  • Hand insertable/removable contacts

 

PERFORMANCE SPECIFICATIONS

Operating temperature: Operating at temperatures from -55°C + 125°C @ rated Current.
Current rating: Max 13 amps all contacts.
Sealing: To IP67. Water does not penetrate seals when submerged in 3 feet of water.
Corrosion resistance:
Connectors show no evidence of corrosion after exposure to 48 hours of salt spray per MIL - STD 1344, method 1001.
Fluid resistance:
Connectors show no damage when exposed to most fluids used in industrial applications.
No. of contacts: 2 and 4
Shell material: Rugged thermoplastic.
Seals Material: Silicone Elastomer.
Contact: Crimp, copper alloy, nickel or gold plating.
Contact current rating:
#12 Size Contact rated at 25 amps continuous at 125°C
Crimp tensile strength:
#12 Size Contacts - 70 LBS
Wire sealing range:
Standard product seals on smooth insulation from 0.134-0.170 inch. (3.40-4.32 mm)

Thin Wall Seals (-C015 mod) seals on smooth insulation from 0.097 to 0.158 inch. (2.46-4.01 mm)
Physical Shock: No unlocking, unmating or other unsatisfactory results during or after 50gs in each of three usually perpendicular planes. No electrical discontinuities longer than 1 microsecond. MIL-STD 202. Method 213, Condition "C".
Vibration:
Maintains continuity and exhibits no mechanical or physical damage after vibration levels of 20 Gs at 10-2000 Hz.
Dielectric Strength: Current leakage less than 2 milliamps at 1500 VAC.
Insulation Resistance: 1000 megohoms minimum at 25°C.
Durability: No electrical or mechanical defects after 100 cycles of engagement and disengagement.
Contact Millivolt Drop: No. 16 contacts - 60 millivolt drop using 16 AWG wire (less drop through wire). Test current 13 amps.

 



© 2012 2012 Imcon Electronics, s. r. o., Bož.Němcové 1, 66451 Brno-Šlapanice; Czech Republic
tel. +420 545 234 440; fax. +420 545 233 169; e-mail: