DTHD_200bDTHD Power Plugs 

Deutsch I.P.D. developed the DTHD Series Power Plugs for those applications requiring a complete, environmentally sealed, single power circuit termination. The plug features an integral coupling latch that provides tactile and audible feedback during coupling. The rugged thermoplastic receptacle is designed as an inline for cable to cable applications and is supplied with an integral Vee-Groove to accept mounting clips, brackets and flanges. Crimp -type solid contact sizes 4,8 and 12 accept wire sizes AWG 6, AWG 8, AWG 10, AWG12 and 14 respectively.
For those heavy-duty rated circuits requiring power, specify the Deutsch I.P.D. Power Plug Series.

 

FEATURES & BENEFITS

  • Integral connector latch
  • Rugged thermoplastic housing
  • -55°C to +125°C operating temperature
  • Silicone seals
  • Current rating up to 100 amps all contacts @ 125°C continuous
  • Fail safe secondary locks
  • Hand insertable/removable contacts

 

PERFORMANCE SPECIFICATIONS

Operating temperature: Operating at temperatures from -55°C + 125°C @ rated Current.
Current rating: Max 13 amps all contacts.
Sealing: To IP67. Water does not penetrate seals when submerged in 3 feet of water.
Corrosion resistance:
Connectors show no evidence of corrosion after exposure to 48 hours of salt spray per MIL - STD 1344, method 1001.
Fluid resistance:
Connectors show no damage when exposed to most fluids used in industrial applications.
No. of contacts: 1
Shell material: Rugged thermoplastic.
Seals Material: Silicone Elastomer.
Contact: Crimp, copper alloy, nickel or gold plating.
Contact current rating:
#12 Size Contact rated at 25 amps continuous at 125°C

#8 Size Contact rated at 60 amps continuous at 125°C

#4 Size Contact rated at 100 amps continuous at 125°C
Crimp tensile strength:
#12 Size Contacts - 70 LBS

#8 Size Contacts 90 lbs.

#4 Size Contacts 300 lbs.
Wire sealing range:
#12 Size Contacts - receive conductor AWG 12 through 14. Rear insert will seal on smooth insulation from .134" to .170" O.D.

#8 Size Contacts - receive conductor AWG8 through 10. Rear insert will seal on smooth insulation from .190" to .240" O.D.

#4 Size Contacts - receive conductor AWG 6. Rear insert will seal on smooth insulation from .280" to .292" O.D.

Thin Wall Seals (-C015 mod) seals on smooth insulation from 0.097 to 0.158 inch. (2.46-4.01 mm)
Physical Shock: No unlocking, unmating or other unsatisfactory results during or after 50gs in each of three usually perpendicular planes. No electrical discontinuities longer than 1 microsecond. MIL-STD 202. Method 213, Condition "C".
Vibration:
Maintains continuity and exhibits no mechanical or physical damage during or while subject to a sinusoidal vibration, having an amplitude of .060 in D.A. and the frequency varied linearly between limits of 10 to 2000 to 10 Hz with a maximum force of 20 gs in a period of 1.0 minute. No electrical discontinuities longer than 1 microsecond.
Dielectric Strength: Current leakage less than 2 milliamps at 1500 VAC.
Insulation Resistance: 1000 megohoms minimum at 25°C.
Durability: No electrical or mechanical defects after 100 cycles of engagement and disengagement.

 



© 2012 2012 Imcon Electronics, s. r. o., Bož.Němcové 1, 66451 Brno-Šlapanice; Czech Republic
tel. +420 545 234 440; fax. +420 545 233 169; e-mail: